International Standard Version
1But Solomon took thirteen years to build his own palace, and finally finished it. 2He built his own palace out of timber supplied from the forest of Lebanon. It was 100 cubits long, 50 cubits wide, 20 cubits tall, and was constructed on four rows of cedar pillars, with cedar beams interlocking the pillars. 3There were 45 pillars paneled with cedar above the side chambers, with rows of fifteen pillars, 4with three rows of framed windows facing each other in three ranks. 5All the doorways and doorposts had rectangular frames, with the doorways facing each other in three tiers.
6There was also a hall of pillars 50 cubits long and 30 cubits wide, and a porch in front with pillars, and a canopy in front of the pillars.
7He constructed the Judgment Hall for the throne room where he would be ruling, paneling it with cedar from floor to ceiling.
8Solomon's personal dwelling quarters, a separate court behind the hall, was of similar workmanship. Solomon also built a house similar to this for Pharaoh's daughter, whom Solomon had married.
9All of these were made with expensive stones, pre-cut according to specifications, hand-sawed inside and out from the foundation to the coping, including from inside to the great court.
10The foundation was made of expensive stone, including large stones ten cubits long and stones eight cubits long. 11Above these were expensive stones cut according to specifications, and cedar. 12So the great court was surrounded by three rows of cut stone, along with a row of cedar beams, just like the inner court of the LORD's Temple and the porch surrounding the Temple.
13King Solomon sent for Hiram from Tyre, 14the son of a widow from the tribe of Naphtali, whose father was from Tyre. A bronze worker, he was wise, knowledgeable, and was skilled in all sorts of bronze working. He went to King Solomon and did all of his work.
15He fashioned two bronze pillars, each one eighteen cubits high, with a circumference of twelve cubits. 16He also crafted two capitals of cast bronze and set them on top of the pillars. The height of one capital was five cubits, and the height of the other capital was five cubits. 17A network of latticework on top of the pillars was inlaid with ornamental wreaths and chains, the top of each pillar containing seven groups of ornamental structures. 18The pillars contained two rows of ornaments shaped like pomegranates around the latticework covering the top of each pillar. 19The capitals on top of each pillar above the rounded latticework contained four cubits of lily designs, 20with the capitals on the two pillars covered by 200 pomegranates in rows around both the capitals above and adjoining the rounded latticework. 21That's how he designed the pillars at the portico of the sanctuary. When he set up the right pillar, he named it Jachin. When he set up the left pillar, he named it Boaz. 22The work on the pillars was finished with a lily design on top of the pillars.
23Hiram also made a sea of cast metal ten cubits from brim to brim, circular in shape and five cubits and 30 cubits in its inner circumference. 24Under the brim, completely encircling it, were two rows of gourds inlaid as part of the original casting, ten to a cubit. 25The sea stood on top of twelve oxen. Three faced north, three faced west, three faced south, and three faced east. The sea was set on top of them, and their hind parts faced the center. 26The reservoir, which held about 2,000 baths, stood about a handbreadth thick, and its rim looked like the brim of a cup or of a lily blossom.
27Hiram also made ten bronze water carts. Each one was four cubits wide, four cubits long, and three cubits high. 28The carts were designed with borders between cross-pieces, 29and on the borders between the cross-pieces were lions, oxen, and cherubim. A pedestal was placed above the cross-pieces, and beneath the lions and oxen there were wreaths hanging down. 30Each cart had four bronze wheels equipped with bronze axles with four support feet. Beneath the basin were cast support structures made like wreaths on each side. 31The opening to each water cart inside the crown on top was one cubit wide, with engravings on the opening. The borders to the frames surrounding the opening were square, not round. 32The four wheels were placed underneath the borders, and the axles for the wheels were on the stand. Each wheel stood one and a half cubits high. 33The wheels resembled those of a chariot, with their axles, rims, spokes, and hubs made of cast bronze. 34Four supports stood at the four corners of each cart, built into the carts themselves. 35On top of each stand was a circular structure one half of one cubit high, with its braces and support frames integral with it, forming a single piece. 36Hiram engraved ornamental cherubim, lions, and palm trees on the surfaces of the supports and frames wherever there was space to do so, and encircled the artwork with wreaths. 37He made ten identical water carts by using the same plans, castings, and shapes for all of them.
38Hiram also fashioned ten bronze basins, each holding about 40 baths, each basin measuring four cubits in diameter, with one basin for each stand. 39He set five of the stands on the right side of the Temple and five on the left side of the Temple. He set the bronze sea on the right side of the Temple eastward facing the south.
40Hiram also made the basins, shovels, and bowls to complete the work that he performed for King Solomon in the LORD's Temple, 41including the two pillars and the bowls for the capitals that stood on top of the two pillars, along with the two lattices that covered the two bowls of the capitals that stood on top of the pillars, 42plus the 400 pomegranates for the two lattices (that is, the two rows of pomegranates for each lattice to cover the two bowls of the capitals that stood on top of the pillars), 43the ten stands with the ten basins on the stands, 44the single bronze sea and the twelve oxen that stood under the sea, 45and the pots, shovels, and bowls—all of these utensils that Hiram made for King Solomon for the LORD's Temple were made from polished bronze. 46The king had them cast in the clay ground between Succoth and Zarethan in the Jordan plain. 47Solomon never inventoried the weight of the bronze used, because there were too many utensils, so the weight of the bronze used was never ascertained.
48Solomon made all the furnishings that were placed in the LORD's Temple, including the golden altar and the golden table on which the bread of the Presence was placed, 49along with the lamp stands (five on the right side and five on the left in front of the inner sanctuary), all made of pure gold, as well as the flower blossoms, lamps, and tongs of gold, 50and the cups, snuffers, bowls, spoons, and the fire pans, all made of pure gold, and hinges for the doors of the inner sanctuary, the Most Holy Place, and for the gates of the Temple that led to the nave, also of gold.
51Thus all the work that King Solomon performed in the LORD's Temple was finished. Then Solomon brought in the articles that had been dedicated by his father David, including silver, gold, and other utensils, and he placed them into storage in the treasuries of the LORD's Temple.